TBN Lubricants - Lubricants

[ For Lubricant Product information, click here. ]

Benefits from Pure Power! Extreme High Performance Motor Oil and Engine Treatment Products

Extreme film strength (stronger not slicker).
Extreme high TBN
Increases horsepower, RPM's, gas mileage and the life of your engine.
Lowers emissions.
Lowers oil and water operating temperatures.
Environmentally friendly - 100% pure petroleum (NOT synthetic) and is 100% recyclable.
DOES NOT CONTAIN ADDED HARMFUL SOLIDS (Teflon, molybdenum-disulfide, poly, graphite, lead, copper, etc).
Exceeds all manufacturers specifications and mil-specs for engine lubricants.
Non-corrosive and actually prevents rust and protects metal surfaces.
Extends life of equipment.
Extends drain and other service intervals.

FAQ's about Pure Power! Motor Oils

Is Pure Power Motor Oil a synthetic?

NO. Pure Power! Motor Oil is produced using the purest mineral oil base stocks and then is compounded using proprietary methods and equipment with the latest American Petroleum Institute approved inhibitors and anti-wear agents. This engineering results in extremely high film strength (stronger not slicker) and very high TBN reserves, which produces the highest quality motor oil delivering extremely high performance reliability.

Is Pure Power! Motor Oil superior to synthetic motor oils?

YES. Synthetic motor oils have gained popularity in the last several years. However, generally unknown to the public, synthetic motor oils were engineered to be beneficial in extreme hot conditions while towing heavy loads, or driving for long periods, or in extreme cold conditions where the synthetic motor oil could provide easier starting in icy temperatures. Synthetic motor oils are a problem for recycling. Pure Power! Motor Oils out perform synthetics in all categories.

Will Pure Power! Motor Oil void my manufacturer warranty?

NO. Under the Magnuson-Moss Warranty Act, 15 U.S. SS 2301-1312 (1982), and general principles of the Federal Trade Commission Act, a manufacturer may not require the use of any brand of motor oil (or other article) to maintain the factory warranty, unless the manufacturer provides the item free of charge. Pure Power! Motor Oil extends the oil change period to 7,500 miles for vehicles within factory warranty period.

Can Pure Power! Motor Oil increase my fuel economy?

YES. Tests have proven Pure Power! Motor Oil will reduce friction in an auto/truck engine and thereby make the engine more fuel-efficient. Most drivers experience an increase in fuel economy of approximately 10% or more depending on driving habits. However, since tests have also shown a significant increase in horsepower, some drivers tend to drive their vehicles harder, thereby wasting their fuel economy.

Can I extend my oil change interval by using Pure Power! Motor Oil?

YES. Pure Power! Motor Oil surpasses all requirements and is API certified long drain for vehicles that are still within the factory warranty mileage period. According to most owner/operator manuals and an article in Consumer's Report Magazine, motor oil should be changed at 7,500 miles for vehicles still within the factory warranty. Pure Power! Motor Oil can extend the oil change period for vehicles out of factory warranty to 12,500 miles providing the TBN remains at 7 or higher.

Can Pure Power! Motor Oil decrease emissions?

YES. Emission Tests have proven Pure Power! Motor Oil to be significant in reducing HC and CO in gasoline, diesel and natural gas fueled engines.

Are Pure Power! Motor Oils licensed by API?

YES. Pure Power! Motor Oils are licensed by American Petroleum Institute with the latest classifications. Pure Power! R & D stays on the leading edge of new categories. Always buy motor oil displaying an API Service Symbol and Certification Mark that identifies quality engine oils for gasoline and diesel powered vehicles. Oils displaying the API Marks meet performance requirements set by U.S. and international vehicle and engine manufacturers and the lubricant industry. API monitors oil quality by a marketplace sampling and testing program.

What weight and quality motor oil should I use?

Your owner/operator manual prescribes a minimum SAE weight and performance quality for your engine's motor oil. A greater quality (but same weight) may be used, but not a lesser quality oil. The weight of oil is shown by a description such as SAE 10W/30, SAE 15W/40 etc. This refers to the viscosity, which is the measure of the oil's thickness and ability to flow at certain temperatures. All single weight oil such as SAE 30 has been obsolete since 1960 and should never be used for engines newer than 1960. There are no performance requirements for single weight oils therefore they do not contain anti-wear agents. The oil's performance level is described by API's "S" (Service) and "C" (Commercial) categories. The latest "S" category is SJ for all automotive engines presently in use. Introduced in the API Service Symbol in 1996. SH is current only when used in combination with certain "C" categories. All other "S" categories are obsolete and should be used only when specifically recommended by the manufacturer. For Commercial use CH-4 is the latest category and was introduced in 1998. CG-4, CF-4, CF-2 and CF are older but still current API Commercial Categories. Equipment operators should always refer to owners' manuals for manufacturers' recommended oil performance levels and viscosities.

Can Pure Power! Motor Oil be used in other than gasoline engines?

YES. Pure Power! Motor Oils are API licensed for use in gasoline, diesel, turbo, supercharged, natural gas, air or liquid cooled engines. Pure Power! Motor Oil and Engine Treatment is excellent for use in motor homes, heavy-duty tow vehicles, off-road and 4X4, farm and construction equipment, truck fleets, pleasure boats and 4-cycle motorcycles. Pure Power! even provides the same excellent results for extreme high performance racing applications. If you drive a small, medium or large engine, in everyday stop and go street driving or long distance highway driving or extreme racing conditions Pure Power! delivers.

How will Pure Power! Motor Oils benefit me?

Pure Power! Motor Oils can help your engine run cleaner and longer to increase gas mileage, extend oil drain intervals, lower emissions and decrease friction, which causes engine wear. This can save you time and money at the gas pump and the repair shop.

Can Pure Power! Motor Oils help the environment?

YES. Pure Power! Motor Oils are friendly to the environment by lowering emissions, increasing gas mileage and extending oil drain intervals (toxic waste). All Pure Power! products and packaging are 100% recyclable.

Do I need Pure Power! Engine Treatment if I use good quality & proper weight motor oil?

YES. If you are using a name brand of good quality and proper weight motor oil, you may want to test the TBN. Most brand name motor oils have a TBN of 7-8 as new oil. Depending on the anti-wear agents, your driving habits, and other factors, the TBN could drop below 7 (creating acid in your engine) in approximately 500-1,000 miles of driving. There are some well-known brands of motor oil that test below 7 right off the shelf. This means that some brands of motor oil are acidic before you put them into your engine. Adding Pure Power Engine Treatment at proper intervals will raise the TBN of your motor oil, increase mileage and horsepower and retard corrosion, in your engine. Pure Power! Motor Oil is engineered with a TBN range of 12-14 and therefore you do not need to use Pure Power! Engine Treatment with when using Pure Power! Motor Oil.

Why is Pure Power! Motor Oil more expensive than my present name brand oil?

Pure Power! Products are made using only the purest base stocks and highest rated anti-wear and detergent agents. Pure Power! Motor Oils are engineered to be more superior in anti-wear and anti-corrosive agents than any other motor oil readily available today. Pure Power! Motor Oils have a TBN range of 13-14. This means a stronger motor oil that performs better, provides more protection, and maintains its viscosity longer.